• HP 57mm twin turbo kit
  • Garrett turbos with Jet-Hot coated exhaust housing
  • QA1 K-member
  • 60 lb/hr injectors
  • Jet-Hot coated piping
• Bilstein HD struts and shocks
• Maximum Motorsports front coil-over kit with 300 lb/in springs
• Maximum Motorsports caster camber plates
• Maximum Motorsports full length subframe connectors
• H&R race rear springs
• Polyurethane motor mounts
• Centerforce DFX 11" clutch disc for 26 spline input shaft (23388144)
• Centerforce I/II pressure plate for 11" disc (CFT360075)
• Fidanza Aluminum flywheel for 11" disc and 8 bolt Cobra crank
• SCT BA2800 MAF with blow through adapter
• Aeromotive Billet Fuel Rails - 14104 (for 96-98 DOHC 4.6L Cobras)
• Stock Fuel rails (these are good up to ~600 rwhp, I'll use the Aeromotives for step 2)
• Aeromotive adjustable fuel pressure regulator with 1:1 boost reference (AEI 13102)
• Walbro 255 lph in-tank high pressure pump (GSS342)
• Kenne Bell Boost-A-Pump - 40 Amp
• Bassani Aluminized catback (BX46975S)
• Fiore adjustable clutch quadrant
• Viper Spec T56 Transmission by D&D Performance
• Maximum Motorsports Oil filter relocation kit
• Brembo stock replacement rotors
• Hawk HPS pads
• Stock replacement fuel filter
• Stock replacement quad shocks
• Stock replacement Ford throwout bearing and pilot bearing

last updated October 12, 2006